MFU and a 65T motor, is it possible?

[monster_beetle]

I've my liftie fitted with a MFU. And I was wondering if it would work with a 65T motor. Will the MFU allow it, or is it too much for it?

[shodog]

I would imagine that 65 Turn motor would put a lot less load on the esc than even the stock 27turn so you should be okay.

[monster_beetle]

Ok, I wasn't sure if a 65T was going to put more or less load (because of it's enormous torque). But this is good to hear :)

[bobtail74]

I second the idea, I have a clod crawler with 55T motors and the battery lasts forever so there has to be less motor draw. Typically with speed controls and the MFU the low turn motors are what cause overheating/damage.