Glitching

[mrkehl29]

Help, just finished my Toyota HILUX build and have bad glitching. Cant seem to figure it out. I am using a tekin rebel 2 and a futaba 4ex radio. Any help would be appreciated. It seems like the shift servo is doing all of the glitching.

[McFig]

Glitching is difficult to diagnose via forum, but we can give suggestions.

So just the shifting servo is glitching? Could be the receiver, the antenna placement or the servo itself. Have you tried a different shifting servo?

[Suprachrgd82]

http://tamiya3speed.com/forum/showthread.php?t=1264

[jdk9997]

I have found that 90% of the glitching I experience is due to low batteries or a bad power connection.

[mrkehl29]

I removed all of the radio gear from the truck, separated the receiver from the esc as far as the wires would physically let me. No motor connected to the esc. I turn on my transmitter then turn on my esc and then the glitching begins. The glitching is on all channels. I then tried to use a castle creations external BEC set to 6 volts the glitching is still there. Finally I used the receiver pack that came with my radio and guess what no glitching. This is really not the solution that I am looking for. Thanks for your fast response to my first post.

[McFig]

Well there you go. So its your receiver. I may not be the solution that your looking for, but at least you found a solution.