diff lockers

[trailqeen]

do any of you know if rc4wd high lift lockers are a direct fit or do you have to do somthing with them, if not do you guys know where i can get i direct fit one

[McFig]

I'm pretty sure they are a direct fit, but I'm not positive. You can send them an e-mail rcrock(at)gmail.com and ask.

But why do you need it? Just put the pin in to lock up the diffs.

[trailqeen]

Because its easyer for me, how do you do it with the pin:first:

[shodog]

Right at the ring gear on the diff there is a hole. you kit comes with a pin that looks like a set screw which screws into the diff through the hole on the axle

http://www.tamiyaclub.com/tc_userimages/34/img34_18092006172141_10.jpg

[trailqeen]

oh i see now, but i know i dont have those does anybody else. thank you guys alot:yourock:

[trailqeen]

ok guys i need that pin so i can lock the front and rear axles, can you guys help me out please if you have one pm me. or post a link so i can order it, Thanks Tanner

[McFig]

Bad news, its in Metal Parts Bag C, which is expensive. Hope someone has a spare to sell you.
Item #: 9400452

http://www.tamiyausa.com/product/item.php?product-id=9400452
http://www3.towerhobbies.com/cgi-bin/WTI0095P?FVSEARCH=9400452&search=Go

[janderson]

ok guys i need that pin so i can lock the front and rear axles, can you guys help me out please if you have one pm me. or post a link so i can order it, Thanks Tanner

Please ask questions like this in trade area

[hydroliftT17]

You can use the ones that come with these. They fit the original high lift diff but I didn’t test them in the axel housing. They are a bit longer so you may have to cut or file them down…. Its a lot cheaper then getting metal parts bag c.

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJJ77&P=ML

[trailqeen]

thanks i might try that

[33 Over]

by the way, the rc4wd spool locker fit and work with nothing else required, i picked one up when i was grabbing a delrin straight axle for my rear and no probs at all