Electrical Landing Gear Issues..Help !

[CLODZ_72_2003]

Anyone having issues with there landing gear?

I have checked the wiring on the battery connectors and rewired the battery connectors, but the landing gear does not stop going up and down..it either continues to push the legs out or retract them without stopping

I checked the switch assembly and when I push back on the supporting leg crank, the landing gears retract ..Once I let go of the leg crank it pushes forward a bit and the landing gears start to push outward again and doesnt stop untill I push the supporting leg crank forward all the way that the landing gear stops clicking

Anyone care to give up there thoughts on this?:What:


Alfy

[podfreak]

it sounds like you have a short in your wring.....try replacing the wiring or contatc tamiya usa.....

[SUPERBLACKBIRD]

Mine is doing the same...

[podfreak]

replace the wiring....

[Mouton]

Are you sure you have placed the two switches correctly in step 8 of the build manual? Check your's against the colour coding given in the manual and compare to step 20 for reference on stick movement vs. expected result.

If you place the the switches incorrectly you might experience an odd behaviour (full stick movement lowers them/half stick movements lowers them).

[CLODZ_72_2003]

Ive checked and rechecked...everything is where it should be


:help:


Alfy