PDA

View Full Version : e-ring problem


giantobo
05-23-2008, 07:08 AM
Hallo everybody,
this is the second time that the front propeller joint loss his e-ring.
Anybody have the same problem??
Suprachrgd82
05-23-2008, 08:54 AM
Sounds like it's time for TRX driveshafts.
McFig
05-23-2008, 10:36 AM
I have heard of others, but I don't know how you guys are losing them so easy.

I usually just put a good size drop of blue thread lock and it keeps it in place.
giantobo
05-26-2008, 02:20 AM
Thank you McFig.
Try with thread lock.
Nightmare
10-10-2008, 04:26 PM
I have hade the same problem. Here's the link to another forum, were othe people helped me. : http://www.scale4x4rc.org/forums/showthread.php?t=23695 . And a good friend (roborg5000) sent me these links:

Yokes
http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=001430907&I=LXJG59&P=K

Shafts
http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=001430907&I=LXJH85&P=K

-I hope no one get mad at me for posting up another forum.. But I hope this helps,

-Derick

MOD: fixed your links
McFig
10-14-2008, 02:23 PM
Putting Traxxas on a Tamiya truck?! :willy_nilly:



:LOL:
Nightmare
10-14-2008, 03:30 PM
They actualy work realy good!! I keeped blowing out the front drive shafts on my f350 so I replaced them with the traxxas shafts. sometimes they fall of the output shaft of the tranfercase, and the input shaft on the axels, so I just tighten the alen screws... I bought them for around $60 shipped CND. (hobby store)

-Derick